By Bajdi on February 22, 2012
Finally I received all the parts to make a small pcb to distribute the power for my Rover 5. I soldered some terminal blocks on it so I could connect my 2 cell 7,4V Lipo battery. The Dagu red back spider robot controller and the motors get their power direct from the Lipo battery. I […]
Posted in Dagu Rover 5 | Tagged robot |
By Bajdi on February 18, 2012
I’ve hooked up the 4 motors from the Rover 5 to the motor controller and connected the direction and PWM pins to the red back spider robot controller (that’s a very long name). When you connect the motors to the motor controller take a good look which motor is what number. You don’t want to […]
Posted in Arduino sketches, Dagu Rover 5 | Tagged nRF24L01, robot |
By Bajdi on February 15, 2012
I’ve been breaking my head over this for the last hour. I want to use the DS1307 RTC module in a home automation project. To do certain time based things. So I thought lets try to rewrite the “blink without delay” example that comes with the Arduino IDE and use the data from the DS1307 […]
Posted in Arduino sketches | Tagged DS1307 |
