By Bajdi on November 17, 2013
I’ve dusted of my Dagu Rover 5 🙂 While I’ve had my Rover 5 for almost 2 years I’ve never really used the encoders. Unfortunately my Rover 5 was delivered with an encoder that didn’t work right. So I decided to have a look at it and try to fix it. It turned out to […]
Posted in Arduino sketches, Dagu Rover 5 | Tagged encoder |
By Bajdi on November 11, 2013
Bought a TFT display from Electrodragon. Electrodragon sells 2 versions, a 1.8″ and a 2.2″ version. I got the 2.2 inch version, it costs only 7.2$. It’s a colour (QVGA) display with 240×320 pixels. The display uses an ILI9341 driver chip. I found the datasheet of the ILI9341 here. The chip works at 3.3V, so […]
Posted in Arduino, Buying parts | Tagged TFT |
By Bajdi on November 7, 2013
My little Ebay bot is powered by 2 cheap DC geared motors. These yellow geared DC motors are very popular. Lots of cheap robot kits use them. I bought mine on Ebay and used double sided tape to stick them to the chassis of the robot. I had one annoying problem with the cheapo motors. […]
Posted in Arduino sketches | Tagged encoder, pwm |