By Bajdi on April 13, 2012
Dagu Rover 5 remote control with nRF24L01 from Bajdi on Vimeo. I have updated my sketch to remote control the Rover 5. There were a couple of things I wanted to try out. The Dagu 4 channel motor controller I use is equipped with 4 current outputs. These outputs give a 0 to 5V signal, […]
Posted in Arduino sketches, Dagu Rover 5 | Tagged nRF24L01, robot |
By Bajdi on March 17, 2012
A while ago I started playing with a couple of nRF24L01 modules. I found 2 Arduino libraries, the Mirf library which is available on the Arduino playground and Maniacbugs RF24 library. I spent quite some time getting these things to work without much success. Eventually I got them to work with the Mirf library. I […]
Posted in Arduino sketches | Tagged nRF24L01 |
By Bajdi on February 18, 2012
I’ve hooked up the 4 motors from the Rover 5 to the motor controller and connected the direction and PWM pins to the red back spider robot controller (that’s a very long name). When you connect the motors to the motor controller take a good look which motor is what number. You don’t want to […]
Posted in Arduino sketches, Dagu Rover 5 | Tagged nRF24L01, robot |